DUO Backer by Vivid
Our exclusive DUO backer allows you to hang your print on a wall without nails or damage and it is REMOvable and REMOountable up to 5 times with our REMO adhesive. You can also use the enclosed dowel and display it on any flat surface.
Q- What sizes do you offer in DUO?
A-5x5 6x6 8x8 8x10 8x12 10x10 12x12 11x14
Q- What finish do you offer in DUO?
A-White + Ultra Gloss---our most popular finish
Will a photo from my phone work on a DUO?
A-Absolutely! See our size guidelines to be sure. We also offer an upressing service if your photo is very pixelated.
Q-How do you place a DUO on a wall?
A-Choose a smooth, clean and dry surface. Peel the white backer off the tape. Apply firm pressure directly over the tape area for 7 seconds- be sure not to bend the metal
Q-How do you remove and remount a DUO print?
A- SLOWLY pull the print from the bottom up. Once you remove the print, remount within 10 seconds to avoid losing adhesion. Choose a smooth, clean and dry surface. Apply firm pressure directly over the tape area for 7 seconds- be sure not to bend the metal
Q- Can I remove and remount it later?
A-Yes, you can remove and remount a year from now—just follow the instructions!
Q-Can I use a screw, hook or nail to hang my DUO?
A-Of course. Get a hook and nail or screw or just a nail and place it on the wall. Notice the notch on the back of the frame? Put the hook/nail/screw under that.
Q-What if I want another size with a typical frame but I do not see it on your site?
A-Go to our Custom Quote page (CLICK HERE) and fill out all the info and we will respond in 1 business day with a quote.
Q-How do I use the dowel to place a print on a flat surface?
A- Remove the dowel from the back of the print. Slowly insert the dowel into the proper hole –you may need to twist the dowel to fully insert it. Place it on your flat surface and enjoy.
Q-Is there a Warranty with DUO?
A- Of course—all our products come with a satisfaction guarantee.
Duo Backer Instructions
To Hang on a Wall
- Choose a smooth, clean and dry surface
- Peel the white backer off the tape
- Apply firm pressure directly over the tape area for 7 seconds- be sure not to bend the metal
To Remove a print from a wall and rehang- You can rehang up to 5 times.
Once you remove the print, rehang within 10 seconds to avoid losing adhesion.
- SLOWLY pull the print from the bottom up
- Choose a smooth, clean and dry surface
- Apply firm pressure directly over the tape area for 7 seconds- be sure not to bend the metal
To hang with a hook
- Get a hook and nail or screw or just a nail and place it on the wall.
- Notice the notch on the back of the frame?
a. Put the hook/nail/screw under that.
To place on a flat surface
- Remove the dowel from the back of the print
- Slowly insert the dowel into the proper hole –you may need ot twist the dowll to fully insert it
- Place it on your flat surface and enjoy
Questions? Info@VividMetalPrints.com 336.283.8679